RFID Inlay for Contactless RFID Card Production
The detail working of RFID Inlay for contactless RFID card production
The procedure of RFID Inlay Chip module punching, chip module implanting, ultrasonic wire embedding, thermo-compression chip welding as well as testing including bad unit marking.The RFID inlay testing process step is highly important for quality assurance. The integrated transponders in the RFID pre-laminated, collated, laminated or inlay sheets are tested, ensuring that the complete output is fully functional.
we produce and provide RFID inlay that have
1.multiple layouts available.
2.multiple chips available.
3.multiple chip combination available.
4.smooth surface and custom thickness.
5.quick turnaround and factory level prices
Specification:
material option | PVC, Transparent PVC, PET etc. |
Antenna | Copper Antenna |
Chips Available | Low frequency 125KHz chips, high frequency 13.56MHz chips, ultra-high frequency 860-960MHz chips, and hybrid chips. |
Internal Structure | Copper antenna welded to chip |
Thickness | 0.38mm, 0.45mm, 0.5mm or custom thickness |
Available Layouts | 2X5, 3X7, 3X8, 4X4, 4X5, 4X10, 5X5, 5X6, 5X10 and more |
Picture showing: